INITIAL SET UP & PAIRING HELP:
Quick Start Version: (When Powering ON your headphone for the first time)
- To Power ON your headphones, press and hold the joystick multi-function button for 1s
- You should hear the “Power On” voice prompt
- You will then hear the “Pairing” voice prompt
- Open Bluetooth Settings on your device and find Icon 180 in your list of available devices
- Then you’ll just want to hit "Confirm Pair” on your device
Another quick way to enter Pairing Mode when your headphones are OFF is to press and hold the joystick multi-function button for 3 seconds. Your Icon 180 will power ON and enter directly into Pairing Mode.
Multipoint Pairing: (Connecting to a 2nd device after initial pairing)
This feature makes it possible to pair your headphones with two devices at once. The connection is managed automatically so after you’ve paired your second device, you won’t miss any calls while you’re streaming your favorite music and videos.
For example — while watching YouTube videos on your laptop, you can take a call on your phone without the hassle of disconnecting from one device to pair with another.
To utilize Multipoint Pairing and pair to a 2nd device when you’re already powered ON and connected to a device:
- Press the multi-function joystick button once and then and hold 3 seconds
- This will again enter your headphones into Pairing Mode, and the voice prompt will say “Pairing.”
- Select the 2nd device from the newly available Bluetooth device list. A voice prompt will say “Connected”.
As mentioned above, once paired to the 2nd device, you will now be able to seamlessly stream from either device as needed.
QUICK START DEFAULT USER CONTROLS
Out of the box you can use your on-board default button controls to keep you connected and in control of your Bluetooth enabled device.
- Power ON your headphones: press and hold the multi-function button (right side) for 1 second
- Power OFF your headphones: press then hold the multi-function button 1 second
- Play or pause your audio or answer/end a call: press the multi-Function Button once
- Reject an incoming call: press the Joystick MFB for 1 second
- Turn volume UP: press the joystick up
- To turn volume DOWN: press the joystick down
CLEAR VOICE SMART MIC
Icon 180 is equipped with Clear Voice Smart Mic. It uses artificial intelligence to isolate the speaker’s voice and reduce background noise.
Clear Voice Smart Mic is especially effective at eliminating discontinuous noise — the kind of background chatter you’d find in a crowded coffee shop or airport.
CUSTOMIZE BUTTON FUNCTIONS
You can personalize your headphones through the Skullcandy APP by customizing your controls.
Some default settings and other un-assigned button settings can be re-configured through the Skullcandy APP on the headphone’s Main Function Button (MFB).
Here are the custom button functions that you can configure to your preferred control settings.
- Single press (1x)
- Double press (2x)
- Triple press (3x)
- Press and hold (1s)
These function controls can be customized in the Skullcandy APP:
- Activate assistant
- Play
- Pause
PRESET EQ + CUSTOM 5-BAND EQ
To help you get the best sound quality from your content, your headphones also feature preset EQ Modes for music, podcasts, and movies - as well as a 5-band Customizable EQ Mode.
The four modes are:
- Music Mode
- Podcast Mode
- Movie Mode
- Custom EQ Mode
Your default EQ setting is “Music Mode,” which is great for general listening.
Podcast Mode removes most of the bass response. It’s great for podcasts or audio books.
Movie Mode enhances dialog and detail in your audio. It creates an immersive experience within your favorite media.
To switch between EQ Modes, go into the Skullcandy APP and select your preferred audio setting.
A voice prompt will notify you each time your EQ mode changes.
SKULLCANDY APP
To unlock and control all of the incredible ICON 180 features, scan the QR code found on the packaging or in your Quick Start Guide/User Guide, and download the Skullcandy app.
Once you have paired your headphones to your device, open the Skullcandy app and it will automatically link to your headphones.
You can use the app to:
- Create your own Custom Button Functions
- Select preset EQ Modes (Music, Bass Boost, Podcast)
- Create and activate your Custom EQ Mode
- Toggle the Low-Latency Audio Mode on/off to improve performance for gaming or streaming your favorite videos
- Deactivate Multipoint Pairing
- Access user guides and troubleshooting help
CHARGING:
Icon 180 is loaded with battery life. It holds up to 50 hours of listening time on a single charge. Icon 180 is also equipped with Rapid Charge technology. 10 minutes of charging via USB-C = 4+ Hours of playtime.
To charge your headphones, use the provided USB-C cable.
You can also check your battery life in the Skullcandy App or from your paired device.
Having Trouble? Don’t return to the store and let us help!
- If you’re having difficulties pairing, you can reset Icon 180 by clearing the paired device list.
- First, remove your headphones from your device’s Bluetooth paired list and turn Bluetooth OFF.
- Power your headphones ON.
- Press the joystick multi-function button for 8 seconds.
- This will turn the headphones off and reset them.
- Power the headphones back on by pressing the multi-function button once.
- To pair, once powered on, hold the multi-function button on your headphones for 1 second. The headphones will enter pairing mode, and you will hear a prompt that says “Pairing”.
- Open the Bluetooth settings on your phone and find Icon 180 in the list of available devices.
- Then, hit CONFIRM PAIR.
- When your headphone is successfully paired, the LED will flash BLUE, and a voice prompt will say “Connected.”
FREQUENTLY ASKED QESTIONS
Customize Button Functions
How easy is it to customize my headphone controls?
- This is done very easily through the Skullcandy APP, where you can independently customize the actions on each of the buttons available.
Can I customize all headphone functions?
- No, you won’t be able to change all functions, but most media controls are available to customize.
Will my custom button actions/functions be saved even if I power Off/restart my device?
- Yes, once your controls are customized in the Skullcandy APP they will be saved until you make changes.
If I get a new phone and need to re-download the APP, will my controls be saved?
- No, you will need to re-link to the Skullcandy APP and customize your headphones again.
GENERAL
Playtime / BATTERY life & Charging:
Battery life and play time are very important to me. How long does the Icon 180 last?
- There are up to 50 hours of play time.
Does Icon 180 have some sort of fast charge?
-Yes, Icon 180 is equipped with Rapid Charge technology. 10 minutes of charging via USB-C = 4+ Hours of playtime.
How do you change between EQ settings, and what’s the difference?
- While paired to a device and linked to the Skullcandy APP, you can toggle between the EQ Modes only from within the APP. A voice prompt will notify you when you select your preferred EQ Mode.
CONNECTION:
Does the Icon 180 link with Skullcandy APP?
- Yes! Icon 180 links to the Skullcandy APP.
What is the Bluetooth range of the Icon 180?
- You will be able to listen up to 30+ feet (10+ meters) away from your paired device, though your connection experience may vary based on your environment.
Can I connect Icon 180 to a computer?
- Yes, as well as a phone, tablet, MP3 player, laptop, or anything else with a Bluetooth connection.
Which version of Bluetooth does Icon 180 use?
- Bluetooth® version 5.3
Can I use Icon 180 for sports or working out?
- Yes, Icon 180 has some sweat and water resistance.
Warranty:
What happens if my headphones break or are lost?
- If it is a manufacturer's defect, Skullcandy has you covered with a 1 Year Limited Warranty.